- All Clothing & Footwear
- Face Shield
Various used face shields. These have definitely seen some wear. They're still very workable, though they will definitely need the shield part replaced as most are scratched up, and some are missing some of the foam padding. 4 different styles that are all pretty similar. (See photos)
Yellow Tychem Suit by Dupont
Full hooded suit, without gloves or boots. It looks to maybe be a disposable version? Used for protection when cleaning up Hazmat spills.
Plug N' Dike
About 1/2lb jar of dry granular Plug N' Dike. Used by Fire Departments and HazMat to control chemical and fuel leaks. Just add water!!!
*Knead Plug N' Dike with water to form a sticky paste.
*Push into hole and smooth out edges.
*Works on 8 feet of head pressure.
Great for dirty surfaces and doesn't require any cure time. Non-toxic and non-flammable.
17" x 19" Universal Spill Pads
Absorbent pads. Used for soaking up various spills and things, perhaps of a hazardous nature.
Universal Absorbent Socks
Highly absorbent "socks" are grey in colour and come in 2 lengths. What do you absorb with them? I'm really not sure. Water? Gas? Paint? Oil? The tears of your enemies? Your call.
Hazmat Coveralls - FR
From Korbanna Protective Apparel these FR coveralls are complete with reflective striping pretty much everywhere. It's at the waist. It's on the wrists. It's on the pockets. It's on the ankles. It's even all over the back, including the writing. Each coverall says some variation of "HAZMAT" on the back, has 10 pockets total, velcro at the collar and wrists, a metal zipper, and a semi-elasticated waistband.
Grade 1 - Excellent Used Condition
Grade 2 - More worn than grade 1, better than grade 3. May have wearing at the ankle cuffs.
Grade 3 - Various stains/oil stains, some patched areas, potentially a few small holes. Would make an excellent general purpose coverall.
Hazmat Personnel Shirt
Genuine Hazmat Personnel shirts, complete with designations. These shirts come in a few styles - long or short sleeved, zippered or buttoned - and a few different fabric types. Shirts are otherwise pretty basic uniform shirts with 2 chest pockets.
Grade 1 - Very Good Used Condition - may have visible marks where patches have been removed.
Grade 2 - may have one or 2 very small holes, or may have been repaired.
Useful for tying stuff to stuff, holding things down, and what have you. These babies are approximately 15 ft long and just over an inch wide, and can easily be clipped together for extra length.
Extender Clip - has a clip end and is about 7" in length.
Extension Strap - is a plain strap with no clip end and is 26" in length.
Grade 1 - Excellent Used Condition
Replacement Face Shield
Replacement Face Shields! We have 2 styles. Though they may look a bit dirty in the photos, fear not! The protective coverings are all in place.
Type 1 is in the first picture.
Type 2 is in the 2nd and 3rd pictures.
SMC J Frame 6 Bar Rappel Rack
Made by Seattle Manufacturing Corporation (SMC) this is their standard J Frame Rappel Rack. Made from stainless steel with aluminum brake bars. J Frame Racks allow the user to adjust friction, while under load, by adding or removing bars, allowing for greater control of the rate of descent.
This item is missing a tie-off bar. Happily, though, brake bars and tie-off bars are replaceable from SMC.
This item is USED. While it appears to be in excellent condition, we cannot guarantee anything. Use at your own risk.
Bermudes Sailing Jacket
This is an older version of the Bermudes VENTURI Sailing Jacket. Waterproof and breathable, the Venturi jacket is ideal protection for all navigators and sailing enthusiasts. This jacket acts as a windbreak while also being water repellent. It has taped seams, mesh lining, a fleece-lined high collar, polyurethane inner sleeves, reflective strips on shoulders and hood, an inner zipped pocket, and 4 outer pockets including 2 fleece lined pockets to keep your hands all toasty warm while you're out in the weather. This jacket also features a hood with visor that folds up into your collar when you don't need it.
Our jacket is in good shape, but clearly is used. There is some fading, a bit of pilling and pulling where the velcro has snagged the shell, and it is a bit dirty. No holes, no repairs, everything is in excellent working condition.
We only have the one so get it while it's here!
Trident Standard Scuba Mouthpiece Holder/Dust Cap
Black Silicon/Rubber scuba mouthpiece cover from Trident. Designed to protect your mouthpiece when you are out of the water, or to hold a spare. A lanyard or keychain can be attached.
Says PAT. 32/267 inside, if that means anything to you.