Long Orange Strap
Pretty much an orange strap. No buckle. 1.5" wide by 17' 10" long*. Look like the kind you might use in a ratchet strap system. Or maybe as a slackline. A short slackline.
*Lengths are approximate and may vary.
Yellow Tychem Suit by Dupont
Full hooded suit, without gloves or boots. It looks to maybe be a disposable version? Used for protection when cleaning up Hazmat spills.
17" x 19" Universal Spill Pads
Absorbent pads. Used for soaking up various spills and things, perhaps of a hazardous nature.
Hazmat Coveralls - FR
From Korbanna Protective Apparel these FR coveralls are complete with reflective striping pretty much everywhere. It's at the waist. It's on the wrists. It's on the pockets. It's on the ankles. It's even all over the back, including the writing. Each coverall says some variation of "HAZMAT" on the back, has 10 pockets total, velcro at the collar and wrists, a metal zipper, and a semi-elasticated waistband.
Grade 1 - Excellent Used Condition
Grade 2 - More worn than grade 1, better than grade 3. May have wearing at the ankle cuffs.
Grade 3 - Various stains/oil stains, some patched areas, potentially a few small holes. Would make an excellent general purpose coverall.
Hazmat Personnel Shirt
Genuine Hazmat Personnel shirts, complete with designations. These shirts come in a few styles - long or short sleeved, zippered or buttoned - and a few different fabric types. Shirts are otherwise pretty basic uniform shirts with 2 chest pockets.
Grade 1 - Very Good Used Condition - may have visible marks where patches have been removed.
Grade 2 - may have one or 2 very small holes, or may have been repaired.
Useful for tying stuff to stuff, holding things down, and what have you. These babies are approximately 15 ft long and just over an inch wide, and can easily be clipped together for extra length.
Extender Clip - has a clip end and is about 7" in length.
Extension Strap - is a plain strap with no clip end and is 26" in length.
Grade 1 - Excellent Used Condition
Replacement Face Shield
Replacement Face Shields! We have 2 styles. Though they may look a bit dirty in the photos, fear not! The protective coverings are all in place.
Type 1 is in the first picture.
Type 2 is in the 2nd and 3rd pictures.
Trident Standard Scuba Mouthpiece Holder/Dust Cap
Black Silicon/Rubber scuba mouthpiece cover from Trident. Designed to protect your mouthpiece when you are out of the water, or to hold a spare. A lanyard or keychain can be attached.
Says PAT. 32/267 inside, if that means anything to you.
Whites 5mm Heat Neoprene Gloves
Neoprene gloves with the Whites twist! 5mm Heat technology keeps your hands warmer than traditional scuba gloves. The interior surface of the palm and fingers is lined with TSS (Titanium Slick Skin) which is warmer, has a faster drying time, and the added benefit of not being stinky. Hurray!
These gloves look to be in near mint condition.
Neoprene Gloves/Scuba/Wet Suit Gloves
These are Neoprene Gloves. They're black. There is no brand or size in them but they seem to be a small-medium, about 5mm thickness. They seem to be in great shape, with a very small potential flaw between the pinky and ring finger of the left hand glove. (See picture.)
Whites Aqua Lung Hood Liner
This hood, made in Canada by Whites, is intended to go underneath of a drysuit hood for added thermal protection and insulation. Fleece, with an elastic and velcro chin strap. I can imagine this hood liner would also go great with any winter sport helmet.
Very Good Used Condition.
Various used face shields. These have definitely seen some wear. They're still very workable, though they will definitely need the shield part replaced as most are scratched up, and some are missing some of the foam padding. 4 different styles that are all pretty similar. (See photos)